Introduction to common thickness and color of fiberglass grating

Since the early 1990s, fiberglass grille has been introduced and produced in China. After years of development, fiberglass grating has been gradually recognized and accepted, and can be used in more and more occasions, such as tree grates for municipal greening tree pits, floor drainage covers for car wash rooms, trench covers, photovoltaic maintenance channels, etc. There are different specifications and models for different applications. In addition, there are many colors and surface types. Some common specifications of glass fiber reinforced plastic grating are summarized in the following sections.

The common size of the whole plate of GRP grating is: 1 × 4.04=4.04 square meters 1.22 × 2.44=2.9758 square meters 1.22 × 3.66=4.4652 square meters

The common aperture size of fiberglass grating is: 12 × 12mm 19 × 19mm 38 × 38mm 50 × 50mm

Common thickness of fiberglass grating

1. 2.5 cm thick grating plate

The bearing capacity is general, and it can bear about 1 ton. It is only suitable for municipal greening trees, pool boards and people walking. It is often used as fiberglass grating walkways, floors, cargo racks, etc. in electroplating plants and equipment plants.

2. 3 cm thick grating plate

It can bear 1-2 tons and can be used in the car wash room

2. 3.8cm thick grating plate

It is applicable to car washing yard, sewage treatment plant, chemical plant, etc., which is often used as a platform and drainage board for vehicle traffic and machine operation.

3. 5.0cm thick grating plate

It can bear about 3-5 tons, and is mostly used in corrosive places such as chemical plants.

4. 6.5cm thick grating plate

The carrying capacity increased in turn.

Common colors of fiberglass grating: green, yellow, gray, blue, red, gray, black, white, etc.

The above is the introduction of the common thickness and color of the glass fiber reinforced plastic grating. When it is put into use, it needs to be cut before installation.